Henny Penny PFE-592 Operator's Manual page 37

3-14.
PREVENTIVE
MAINTENANCE
(CONT.)
July 2003
Reversing Lid Gasket (Continued)
Be sure the metal arm on the left side of the lid is
in the vertical position holding the lid upright, or
severe injuries could result. (See photo at left.)
3.
Using a thin blade screwdriver, pry out the gasket at the corners.
Remove the gasket.
Check the gasket for any tears or nicks. If the
gasket is damaged, it needs to be replaced.
4.
Clean the gasket and gasket seat with hot water.
5.
Rotate the gasket with the opposite side facing out.
Install the 4 corners of the lid gasket. Smooth
the gasket into place, working from the corners
towards the middle of each side.
Lubricating Lid Rollers - Annually
The lid rollers, in the back of the fryer, should be lubricated at least once
a year, to allow the lid easy movement.
1.
Remove the back shroud of the fryer.
2.
Using spindle lube, part number 12124, place a small amount of lube
on both top and bottom rollers. Make sure to lube both left and right
rollers.
31