Henny Penny PFE-592 Operator's Manual page 18

2-7.
INTERNATIONAL
ELECTRICAL
REQUIREMENTS
(CONT.)
Sept. 2008
•
The supply power cords shall be oil-resistant,
sheathed flexible cable, no lighter than ordinary
polychloroprene or other equivalent synthetic
elastomer-sheathed cord.
•
It is recommended that a 30 mA rated protective
device such as a residual current circuit breaker
(RCCB), or ground fault circuit interrupter (GFCI),
be used on the fryer circuit.
(FOR EQUIPMENT WITH CE MARK ONLY!)
To prevent electric shock hazard this appliance
must be bonded to other appliances or touchable
metal surfaces in close proximity to this appliance
with an equipotential bonding conductor. This
appliance is equipped with an equipotential lug
for this purpose. The equipotential lug is marked
with the following symbol
12
.