Setting Compatibility (Devicenet Configuration) - Festo CP-FB11-E Programming Manual

1. Installation

1.2.3 Setting compatibility (DeviceNet configuration)

1−8
Field bus node FB11 is available since February 2001 in an
updated and improved software version for the DeviceNet.
This current software version offers some simplifications in
configuring and commissioning a CP system on the Device
Net.
The current software version is no longer compatible with
field bus nodes with the earlier software version (V1.4). You
can, however, switch the field bus node to the earlier software
version and thereby restore compatibility with the earlier
DeviceNet configuration.
Setting compatibility
DIL switch
ON
1
2
3
4
Switch element 3 must always be set to ON.
Fig. 1/5: Setting compatibility (DeviceNet configuration)
with switch element 4 of the DIL switch
Compatible to earlier
versions
Version 1.4
(until 01.02.2001)
3
4
ON
Festo P.BE−CP−FB11−E−EN en 0802d
Current software
version
Version 2.1
(as from 01.02.2001)
(as supplied)
3
4
ON