Setting The Dil Switch; Technical Appendix - Festo SPC-10 Manual

Technical appendix

A.1 Setting the DIL switch
WARNING
Incorrect DIL switch settings may lead to damage to
the fixed stops and to the cylinder. Take great care
when setting the DIL switches.
On the SPC-10, the positioning behaviour is determined
by amplification and cushioning stages. These stages
are matched exactly to certain valve-cylinder combina-
tions and mass loads for horizontal and vertical oper-
ation.
You can set the appropriate amplification and cushion-
ing stages for your application with the DIL switches on
the SPC-10. When supplied from the factory all 6
elements of the DIL switch are set to OFF.
1
2
Fig. A/1: Factory setting = All DIL switch elements
SPC-10 9902a
OFF
ON
Side view of DIL switch
Black = pressed down
set to OFF
1
2
A-3