Configuration' Parameter Group - Festo VPPI S1BT Series Manual

Commissioning
Connection control
Establish a connection to a VPPI with a Bluetooth interface.
The connection to a VPPI with Bluetooth interface can be established via 'Select Bluetooth device' and
'Connect'. When the connection is established, all parameters are compared with the valve and then
either the values from the offline settings in the plug-in or those from the valve are imported. As long
as the connection exists, valid parameter changes are effective immediately in the valve.
Parameter panels
Navigation between different parameter groups.
The parameters of the VPPI are divided into groups. There is a tab in which the parameters can be set
for every group.
Operating range
If the 'Parameterisation' context section is selected, parameters and their current settings are dis-
played in the working section. The appearance of the working section differs slightly for different
parameter groups.
If the 'Diagnosis' context section is selected, the corresponding diagnostic values are displayed in the
work area.
8.2.5

'Configuration' parameter group

Fig. 7: 'Configuration' parameter group (example)
Festo — VPPI-...-S1BT — 2021-11 15