Configuration With Com Profibus - Festo SPC200 Series Manual
Smart positioning controller fieldbus module profibus-dp
Hide thumbs
Also See for SPC200 Series:
- System manual (506 pages) ,
- Manual (404 pages) ,
- Electronic manual (103 pages)
Table of Contents
Advertisement
4. Commissioning
4.3.1 Configuration with COM PROFIBUS
General instructions
The COM PROFIBUS software package serves for
planning
PROFIBUS masters from Siemens or with compatible
masters. In order to understand this chapter you should
be sure of how to operate your configuration program.
If necessary, refer to the documentation on the COM-
PROFIBUS. This manual refers to software version 3.0.
Installing the GSD file
In order that the SPC200 can be configured with COM
PROFIBUS, a data carrier containing a GSD file and a
BITMAP file is supplied with this manual. Information on
using the GSD file is contained In the README file in
the main directory.
The files must be installed as follows, in order that all
necessary information about the SPC200 is made
known to the COM PROFIBUS configuration program.
4-20
and
commissioning
in
conjunction
with
SPC200-COM-PDP 9904NH
Advertisement
Table of Contents
