Commissioning And Addressing On The Devicenet; General Information - Festo CP-FB11-E Programming Manual
Cp field bus node 11
Hide thumbs
Also See for CP-FB11-E:
- Brief description (62 pages) ,
- Brief description (62 pages) ,
- Brief description (62 pages)
Table of Contents
Advertisement
2. Commissioning
2.2
Commissioning and addressing on the DeviceNet
2.2.1 General information
Festo P.BE−CP−FB11−E−EN en 0802d
Please note
Field bus node type CP FB11−E can be used on all
DeviceNet masters.
This chapter describes configuration and commissioning
using as an example the controllers from Allen−Bradley.
Please note the following special features when using the
node on the DeviceNet:
The addresses of all recognized DeviceNet slaves can be
freely assigned as M−file addresses or as discrete I/Os in
the Scan list.
The addresses of network slaves are assigned in ascend
ing order.
The input and output addresses can be assigned indepen
dently of each other.
Please note
Order the addresses of the network slaves so that there is
sufficient reserve for later extensions.
The following sections contain generally valid instructions on
the configuration of the node on the DeviceNet.
Detailed information can be found in the documentation or in
the help for the configuration program you are using.
2−7
Hide quick links:
Advertisement
Chapters
Table of Contents
