Appendix B: Suggested Torque Limits For Standard Hardware; Standard Head Markings; Hex Bolts; Other Bolts - Taylor-Dunn SC-001-59 Operation, T Roubleshooting And Replacement Parts Manual

APPENDIX B: SUGGESTED TORQUE LIMITS FOR STANDARD
HARDWARE
HARDWARE IDENTIFICATION

Standard Head Markings

NOTE: Torque value used should be for lowest grade of hardware used. If a grade 2 nut is used on a
grade 8 bolt, use grade 2 torque value.
NOTE: Toque values specified are for clean dry threads.

Hex Bolts

Other Bolts

Truss Head, grade 2
S.A.E. Grade 2
S.A.E. Grade 8
Appendixes
S.A.E. Grade 5
L'9
L'9
Carriage Bolt, grade 2
(unless marked as above)
Appendixes
Appendix B
Page 3