Barco ImagePRO-II Jr User Manual Addendum page 96

4. Menu Orientation
oÉÅ~ääáåÖ=~=póëíÉã=sáÉï
The Recall View Submenu lets you apply a saved system view to the selected input. You
can recall any previously saved system view.

Use the following procedure to apply a view to the current input:
1.
2.
3.
4.
aÉäÉíáåÖ=~=sáÉï=Ñêçã=íÜÉ=póëíÉã
You can delete any custom views from the system. When you delete a view, you return the
system default settings to the named view. You cannot delete the system name for a view.
You cannot delete the default view for an input.

Use the following procedure to delete a view from the system:
1.
2.
3.
4.
5.
ImagePRO-II • User's Guide
Note Recalling applies the selected view to the input, but does not
save the view to the input. To save the view across power
cycles, refer to
Select the input to which you want to assign a view.
On the Views Menu, select Recall. The Recall View Submenu appears.
RECALL VIEW
> View
Recall
Figure 4-66. Recall View Submenu (sample)
At the View field, press SEL. Scroll to the name of the view that you want to apply
to the selected input. Press SEL again.
Scroll to Recall and press SEL. The view is assigned to the selected input. This
view will be used for this input until you change it or power down the system.
When you power down the system, the input's settings return to their previous
values.
Select Views from the Setup Menu.
On the Views Menu, select Delete. The Delete View Submenu appears.
DELETE VIEW
> View
Delete
Figure 4-67. Delete View Submenu (sample)
Select View.
Select the name of the view that you want to delete.
Scroll to Delete and press SEL.
Creating and Saving Views
Saving a View to an Input
View9
View15
on page 79.
81