Barco ImagePRO-II Jr User Manual Addendum page 78

4. Menu Orientation
pÉííáåÖ=`çäçêpé~ÅÉI=p~ãéäÉ=o~íÉI=~åÇ=_áí=aÉéíÜ=
The ImagePRO-II supports setting the output colorspace, sample rate and bit depth. Within
limits, you can modify these settings for some outputs.
From the Output Menu, select the ColorSpace/Bit Depth option. The following menu
appears, showing valid options for each output type.
OUT COLOR/SAMPLE/BIT
> DVI
HD15
HDMI
DP
SDI 1
SDI 2
Figure 4-38. Output Color/Sample/Bit Menu
The options vary according to the output type:
•
•
•
•
ImagePRO-II • User's Guide
RGB,
RGB,
RGB,
RGB,
YCbCr
YCbCr
DVI — The option is:
~
RGB, 4:4:4, 24 bit
The preceding setting is also the default setting upon format change, or when the
EDID information is invalid or not present.
HD-15 — The options are:
~
RGB, 4:4:4, 30 bit
~
YCbCr, 4:4:4, 30 bit
The default settings upon format change or when EDID information is invalid or
not present are:
~
Sync on G/Y: YCbCr, 4:4:4, 30 bit
~
HV Sync or CSync: RGB, 4:4:4, 30 bit
HDMI — The available options are based on the output EDID information, and can
include:
~
RGB, 4:4:4, 24 bit
~
RGB, 4:4:4, 30 bit
~
RGB, 4:4:4, 36 bit
~
YCbCr, 4:4:4, 24 bit
~
YCbCr, 4:4:4, 30 bit
~
YCbCr, 4:4:4, 36 bit
The default setting upon format change is:
~
RGB, 4:4:4, at a bit depth equal to the maximum supported, as given in
the EDID information.
The default setting when the EDID information is invalid or not present is:
~
RGB, 4:4:4, 24 bits
DisplayPort — The options are:
4:4:4, 24bit
4:4:4, 30bit
4:4:4, 24bit
4:4:4, 24bit
4:2:2 30bit
4:2:2 30bit
Configuring Outputs
63