Barco ImagePRO-II Jr User Manual Addendum page 79

4. Menu Orientation
Configuring Outputs
•
pÉííáåÖ=lìíéìí=bÑÑÉÅíë
The Output Effects Submenu sets properties of the output image, such as contrast and
brightness, color balance, and sharpness. From the Output Menu, select Effects to
access this menu.
OUT EFFECTS
> Contrast
Brightness
Color Balance
Gamma
Monochrome
Invert
Sharpness
Flicker Reduce
Image Flip
Strobe Mode
Strobe Rate
Figure 4-39. Output Effects Submenu
If the 3D/Dual Channel mezzanine is installed and the system mode is set to Dual2K, this
menu includes the option to change these settings for each channel.
64
~
RGB, 4:4:4, 24 bit
~
RGB, 4:4:4, 30 bit
~
RGB, 4:4:4, 36 bit
~
YCbCr, 4:4:4, 24 bit
~
YCbCr, 4:4:4, 30 bit
~
YCbCr, 4:4:4, 36 bit
The default setting upon format change is:
~
RGB, 4:4:4, to the maximum bit depth supported, as given in the EDID
information
The default setting if EDID information is invalid or not present is:
~
RGB, 4:4:4, 24 bit
The 36-bit rates may not be available if output timings are not compatible.
SDI 1 and SDI 2 — SDI 2 is only available when the dual-channel mezzanine is
installed. The options are:
~
YCbCr, 4:2:2, 30 bit
~
RGB, 4:4:4, 30 bit
~
YCbCr, 4:4:4, 30 bit
~
RGB, 4:4:4, 36 bit
~
YCbCr, 4:4:4, 36 bit
100
100
>>
1.0
Off
Off
+0
n/a
Off
Off
n/a
ImagePRO-II • User's Guide