Table of Contents
Advertisement
4. Menu Orientation
Operating the ImagePRO-II in Dual-Channel Mode
OUT EFFECTS
> Channel
Contrast
Figure 4-103. Output Effects Submenu in Dual-Channel Mode
pÉííáåÖ=íÜÉ=^êÉ~=çÑ=fåíÉêÉëí=áå=aì~äJ`Ü~ååÉä=jçÇÉ
With the 3D/Dual Channel mezzanine installed and the system mode set to Dual2K, the
Area of Interest Menu includes a Channel field that lets you set the AOI separately for
each channel. The AOI will apply to any output mapped to the selected channel.
AREA OF INTEREST
> Channel
H Size
V Size
H Pos
V Pos
Reset
Figure 4-104. Area of Interest Submenu in Dual-Channel Mode
To set or revert the output Area of Interest in dual-channel mode, use the following
procedure:
1.
2.
3.
4.
To revert all your changes for a channel to their default settings, select Reset.
tçêâáåÖ=ïáíÜ=m~å=~åÇ=wççã=pÉííáåÖë=áå=aì~äJ`Ü~ååÉä=
jçÇÉ
If you have the 3D/Dual Channel mezzanine installed, and you set the system mode to
Dual2K, the Zoom/Pan Menu provides the option to create a view that can be used on one
or both channels. When you assign a view to a channel, you can recall and save that view
to any input that uses the selected channel or channels.
In dual-channel mode, the first lines of the Zoom/Pan Menu look like those in the following
illustration.
110
From the Output Menu, select Area of Interest. The Area of Interest Submenu
appears, showing default settings equal to the H and V actives of the output
timing.
Select a channel to work with, or accept the default setting of All.
Adjust the AOI as described in
If required, repeat steps 2 and 3 for the second channel.
B
B
100
A
A
850
1080
0
0
"Setting the Area of
Interest" on page 56.
ImagePRO-II • User's Guide
Advertisement
Chapters
Table of Contents
