Barco ImagePRO-II Jr User Manual Addendum page 57

4. Menu Orientation
Configuring Inputs
6.
rëáåÖ=j~ëâ=mêÉëÉíë
The Mask Presets feature on the input Sizing Adjust Submenu provides a convenient
way to mask all the edges of an image at once, to a preset aspect ratio. The following figure
shows the available aspect ratios.
MASK PRESETS
> Set to 16:9
Set to 5:4
Set to 4:3
Set to 3:2
Set to 1:1
Figure 4-10. Mask Presets Submenu
•
•
•
•
•
As with any mask, presets are additive and are applied to the edges of the image. If you
mask a 16:9 image to a 5:4 aspect ratio, the result looks like the lower image in the
following illustration.
42
Press SEL to confirm your choice.
Note To restore the original unmasked image, refer to
Masking Effects
Select Set to 16:9 to mask the image to a 16:9 aspect ratio.
Select Set to 5:4 to mask the image to a 5:4 aspect ratio.
Select Set to 4:3 to mask the image to a 4:3 aspect ratio.
Select Set to 3:2 to mask the image to a 3:2 aspect ratio.
Select Set to 1:1 to mask the image to a 1:1 (square) aspect ratio.
on page 43.
ImagePRO-II • User's Guide
Resetting