Barco ImagePRO-II Jr User Manual Addendum page 128

4. Menu Orientation
dÉåäçÅâ=pÉííáåÖë=áå=aì~äJ`Ü~ååÉä=jçÇÉ
Using the Output > Genlock Submenu in dual-channel mode, you can lock Channel B to
Channel A, so that the sources remain in sync, or you can set Channel B to Freerun to
remove this lock. In dual-channel mode, the Genlock Submenu looks like the one in the
following illustration.
G E N L O C K
> C H A S o u r c e
Figure 4-109. Genlock Submenu in Dual-Channel Mode

To change Genlock settings in dual-channel mode:
1)
2)
3)
4)
5)
ImagePRO-II • User's Guide
C H B S o u r c e
H / V O f f s e t
H D - 1 5 S C P h a s e
C o m p S C P h a s e
C H A S t a t u s
C H B S t a t u s
Select Output > Genlock.
The Genlock Submenu appears. The first field shows the Channel A source for
the selected input.
If required, change the Channel A source. The options are:
~
Another input
~
Ext(ernal)
~
Freerun
CHB Source defaults to Lock to A. With this option, Channel B remains locked to
Channel A at all times, regardless of the Genlock source selected for Channel A.
If desired, this field can also be changed to Freerun in order to disable the locked
association with Channel A.
The H/V Offset Submenu enables the independent adjustment of H and V offset
for each channel.
You can view the current lock status for Channel A and B in the last two fields of
the Genlock Submenu.
Operating the ImagePRO-II in Dual-Channel Mode
I n 6 ( S D I - 2 )
L o c k t o A
> >
n / a
n / a
N o S y n c
L o c k e d
113