Notification Windows And Dialogs - Siemens SIPROTEC 5 Operation Manual

5.6

Notification Windows and Dialogs

Notification Windows
The notification windows appear briefly in the base bar to give you important information during on-site oper-
ation and close automatically. For example, they contain the following information:
[scmitfen-080413-01.tif, 1, en_US]
Figure 5-7
Dialogs
Dialogs are interactive notification windows in the base bar. In the dialogs, you are prompted to actively carry
out actions. A dialog consists of the following elements:
•
Dialog designation
•
Two softkeys (bottom left and right)
•
Text information with interactive text box or list boxes
You confirm the context-dependent command prompts offered here by pressing the softkeys below the
prompts.
[scdialpa-080413-01.tif, 1, en_US]
Figure 5-8
[scdiawrt-080413-01.tif, 1, en_US]
Figure 5-9
If a command prompt is shown in the dialog, then you can activate the functions in the following list by
pressing the softkeys below each function.
Softkey
Left
Delete
Escape
Log off
Start/Test
Switch
NOTE
i
i
If you do not confirm the dialog with a softkey, the action you wish to achieve is canceled after a previously
set time. The prior state is restored.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
Examples of Notification Windows
Dialog for Entering the Confirmation ID
Dialog for Entering a Value
Function
Delete log
Cancel current action
Log off
Start an action
Switch equipment

5.6 Notification Windows and Dialogs

Softkey Function
Right
Enter Confirm value
OK Confirm action
Log in Log in
Menu Main Menu
Change Change value
Using On-Site Operation Panel
65