Siemens SIPROTEC 5 Operation Manual page 71

Example of a Circuit Breaker
A circuit breaker can have the status open or closed.
breaker in the information routing of DIGSI 5.
[scranma2-260814-01, 1, en_US]
Figure 5-14
The following figure shows an example of the routing of the circuit-breaker switch position. Here, the Bina-
ryinput1.1 shows the closed circuit-breaker switch position 1. [GH] indicates that the voltage on binary input
1.1 is active and signals a closed circuit breaker.
[scbinipt2-260814-01, 1, en_US]
Figure 5-15
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
Properties of the Circuit Breaker
Circuit-Breaker Status on the On-Site Operation Panel
Figure 5-14 displays the various properties of the circuit
Using On-Site Operation Panel
5.8 Display of Routings and Status
71