Siemens SIPROTEC 5 Operation Manual page 69

[scbinipt5-260814-01, 1, en_US]
Figure 5-11
•
Use the navigation keys to select the binary input, for example, Binaryinput1.1.
All signals routed to Binaryinput1.1 are displayed as a list (see
Example of a Signal
•
Go to the information routing in DIGSI 5 and select the properties H or L for the input
initiation off.
This status will also be displayed on the on-site operation panel of the SIPROTEC 5 device.
Figure 5-13 shows you the routing of the signal
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
List of Binary Inputs
Figure 5-13).
>Ext. trip initiation , for stage 1.
Using On-Site Operation Panel
5.8 Display of Routings and Status
>Ext. trip
Figure 5-12 and
69