[scdevdia-090413-01.tif, 1, en_US]
Figure 8-23
NOTE
i
i
•
The device-diagnosis log cannot be deleted!
•
The logged indications are preconfigured and cannot be changed!
8.4.5.9
Communication Log
The logging of the respective status such as ensuing faults, test and diagnosis operation, and communication
capacity utilizations is done for all hardware-based configured communication interfaces. Up to 500 indica-
tions can be stored in the communication log. Logging occurs separately for each communication port of the
configured communication modules.
Reading from the PC with DIGSI 5
•
Use the project-tree window to reach the communication logs of your SIPROTEC 5 device.
Online access → USB → Project → Test suite → Communication module
•
Then select:
J:Onboard Ethernet → Communication log
The status of the communication log last loaded from the device is shown to you under the Time stamp item.
•
To update (synchronization with the device) click the button Update in the headline of the indication list.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
Reading the Device-Diagnosis Log on the On-Site Operation Panel of the Device
Operation in the Operating State
8.4 Indications
131