Typographical Conventions; Warning Symbols; Notification Symbols; Presentation - Siemens RWF40 Series User Manual

1.3 Typographical conventions

1.3.1 Warning symbols

Danger
Caution
Caution

1.3.2 Notification symbols

Note
Reference
.
abc¹ Footnote
✱ ✱ ✱ ✱
Action

1.3.3 Presentation

Buttons
PGM
Button
EXIT
+ ▲
combi-
nations
Landis & Staefa Division
The signs for Danger and Caution are used in this Manual under the following
conditions:
This symbol is used where there may be a danger to personnel if the instructions are
disregarded or not strictly followed!
This symbol is used where there may be damage to equipment or data if the
instructions are disregarded or not strictly followed!
This symbol is used if pre-cautions must be taken in handling electrostatically
sensitive components.
This symbol is used to draw your special attention to a remark.
This symbol refers to additional information in other Manuals, chapters or sections.
Footnotes are comments, referring to specific parts of the text. They consist of two
parts:
1) The markings in the text are arranged as continuous superscript numbers
2) The footnote text is placed at the bottom of the page and starts with a number
and a period
This symbol indicates that a required action is described.
The individual steps are indicated by an asterisk, e.g.:
✱ ✱ ✱ ✱
Press the ▲ button
Buttons are shown in a box. Either symbols or text are possible. If a button has multiple
assignments, the text shown is always the one that corresponds to the function
currently used.
The representation of buttons combined with a plus sign means that first the
EXIT
button must be pressed and held down and then the other button.
CC1B7865E
1. Introduction
February 10, 2000 7/56