Control With Small Display - Siemens SIPROTEC 5 Operation Manual

Operation in the Operating State
8.8 Control System on Site
[scauswqa-090413-01.tif, 1, en_US]
Figure 8-63
You can also initiate a control action via the navigation keys after selecting a switching device.
To do so, select Open or Close in the menu and confirm with Ok.
[scsteuvo-090413-01.tif, 1, en_US]
Figure 8-64

Control with Small Display

8.8.6
For devices with the small display, you can control from the switching device list, in the same way as for
devices with the large display. A single-line representation of the feeder is impossible here.
•
Select the list of all switching devices in Commands/Equipment and then the switching device to be
controlled in the Control menu item.
The currently recorded position is shown to you.
•
You now control via the right context-sensitive key (labeled Switch).
•
Then select the target position (off or on).
•
Confirm the query of the confirmation ID.
After entering the confirmation ID for on-site control, the switching command is output while considering the
interlocks (switchgear-interlocking protection conditions, switching authority, etc.).
170
Selecting a Switching Device in the Control Diagram
Initiating Control Action
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016