Siemens SIPROTEC 5 Operation Manual page 70

Using On-Site Operation Panel
5.8 Display of Routings and Status
[scranma1-260814-01, 1, en_US]
Figure 5-12
Figure 5-13 shows that [L] active without voltage for the signal
parameterized. In the Line function group, the Overvoltage protection (ANSI 59) is also operated. In addi-
tion, the Binaryinput1.1 can also block this protection function. The blocking function will become active with
[H] active with voltage.
[scbinipt1-260814-01, 1, en_US]
Figure 5-13
70
Entry in the Information Routing
Status of Binaryinput1.1
>Ext. trip initiation was
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016