Incoming Inspection - Siemens SIPROTEC 5 Operation Manual

First Steps

1.2 Incoming Inspection

1.2 Incoming Inspection
Siemens recommends that you check devices which are not assembled.
Safety Notes
!
DANGER
Danger during incoming inspection
Noncompliance with the safety notes, can result in death, severe injury or considerable material
damage.
Comply with all given safety notes when carrying out the incoming inspection.
²
Please note that hazardous voltages are present when you perform the incoming inspection.
²
If you identify a defect during the incoming inspection, do not rectify it yourself. Repack the device and
²
return it to the manufacturer, stating the defect. Use the original packaging or transport packaging that
meets the requirements of standard ISO 2248.
Performing a Follow-Up Inspection on a Device
Visually check for external damage as soon as you have unpacked the devices; they must not show any
²
signs of dents or cracks.
Checking the Rated Data and Functions
Check the rated data and functions using the complete order designation/the product code. The device
²
manual contains all technical data and a description of the functions.
Check the information provided on the rating plate too. The device features a product label sticker, which
²
contains the Technical data.
Make sure that the rated data of the device properly matches the power-system data. You can find the
²
necessary information in the device manual.
18 SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016