Siemens SIPROTEC 5 Operation Manual page 116

Operation in the Operating State
8.4 Indications
Table 8-1
Indications in
Log for operational indications
and log for user-defined indica-
tions
log for fault indications
Log for ground-fault indications
Spontaneous indication window
(DIGSI 5)
DIGSI 5: Quality Indication Column
Quality
Good
Invalid
DIGSI 5: Additional Information Indication Column
The entries in the column for additional information are in the format Cause/Originator/Additional Cause:
•
Cause → What was the cause?
•
Originator → Who was the originator?
•
Additional cause → Supplementary notes
Cause
Data change
Data update
General interrogation
116
Overview of Additional Information
DIGSI 5 Information
Time stamp (date and time),
Relative time,
Increasing entry number,
Value,
Indication number,
Quality,
Cause
Time stamp (date and time),
Relative time,
Error number,
Increasing entry number,
Value,
Indication number,
Quality,
Cause
Time stamp (date and time),
Relative time,
Error number,
Increasing entry number,
Value,
Indication number,
Quality,
Cause
Time stamp (date and time),
Error number,
Increasing entry number,
Value,
Indication number,
Quality,
Cause
Meaning
Indication is valid
Indication is invalid
Meaning
Value change in an indication
Update of notification value
General interrogation
Device Display Information
Time stamp (date and time),
Value
Time stamp (date and time),
Error number,
Value
Time stamp (date and time),
Error number,
Value
Time stamp (date and time),
Error number,
Value
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016