Testing Function; Troubleshooting - Panasonic VG-M186D Operation Manual

Testing Function

* Absolutely do not have these operations performed by anyone other than
qualified personnel who have Class A-4 certification in Fire Defense Equipment
Officer.
試験
VG-M186D
火災
FIRE
押す
PUSH
Top: Master Display
Test
Switch
Bottom: Monitor Display
Fire alarm indicator flashes.
Stop alarm indicator flashes.
Automatic Residential
Fire Alarm
Fire indicator flashes.
Fire alarm display flashes.
While
pressed
Fire alarm indicator flashes.
Fire confirmation indicator
Automatic Apartment flashes. Stop alarm indicator
Building Fire Alarm
flashes.
Fire indicator flashes.
Fire confirmation display
Fire alarm indicator flashes.
Stop alarm indicator flashes.
Automatic Residential
Fire indicator flashes.
Fire Alarm
Fire alarm displayed.
Gas leak indicator flashes.
Pressed
Gas leak display
continuously
for at least
Fire alarm indicator flashes.
40 seconds
Fire confirmation indicator
flashes.
Automatic Apartment Stop alarm indicator flashes.
Building Fire Alarm
Fire indicator flashes.
Fire confirmation display
Gas leak indicator flashes.
Gas leak display
108
From the display panel, press the test
窓 switch with a thin stick such as a toothpick.
WINDOW
玄関
DOOR
Alarm Sound
"Pin-pon pin-pon pin-pon, fire,
fire. A fire has broken out.
Please evacuate the premises
in a safe manner. (2 times)
(Byuu-byuu-byuu, 3 times)"
"Pin-pon, pin-pon, pin-pon,
the fire detector has been
activated. Please check."
Release the
test switch.
"Pi pi pi pi pi. Gas leak."

Troubleshooting

Inspect the following items. Refer to the instruction manual for the telephone.
■Indoor Master and Telephone
It is not possible to talk.
It is not possible to talk to
the Lobby Intercom or the
manager's office.
A continuous pi pi pi sound
can be heard from the Indoor
Stopping
Master speaker.
the Alarm
■Telephone
Automatically answers calls
from lines other than external
lines and enters talk status.
The telephone does not ring
except for calls from external
lines.
The telephone does not
connect outside.
Automatically answers calls
from lines other than external
lines and enters talk status.
Symptoms Inspection
Is the handset off the hook?
Is the handset off the hook?
Symptoms Inspection
Is the number of rings before
the answering machine
response set to three or less?
Is the telephone set to not ring?
Do the telephone line settings
match the type of telephone
lines that are being used?
Is the telephone handset
off the hook?
Response
Properly place the handset
on the hook.
Please notify the manager's
office of the condition, and
consult with the store where
you purchased the product.
Properly place the handset
of the Indoor Master or
Telephone on the hook.
Response
Set it to four or more.
Refer to page 101 and change
the setting.
(Extension call ringer setting)
Match the settings to the
type of telephone lines that
are being used.
Properly place the handset
of the Telephone on the hook.
109