Emergencies (Emergency Alarm); Security Sensor Operation (Security Alarm) - Panasonic VG-M186D Operation Manual

Emergencies
(Emergency Alarm)
If the Emerg. Button Is Pressed...
Monitor: Emergency indicator flashes and
Indoor Master
emergency alarm appears.
Expansion Emergency
Button
Hardware: Stop alarm indicator flashes.
* Only when the Emerg. Button
is pressed.
VG-M186D
火災 窓 電源
FIRE WINDOW POWER
押す 玄関 外出
PUSH DOOR ABSENT
警報音停止 画面表示
非 常
STOPALRM DISPLAY
EMERG.
Byuu, byuu.
Or Color Monitor
ハンズフリー
HANDS FREE
Warning! Emergency situation.
Indoor Master
Extension
火災 窓 電源
FIRE WINDOW POWER
押す 玄関 外出 VG-R397N
非常押ボタン
PUSH DOOR ABSENT 強く
押す
警報音停止 画面表示
非 常
STOP ALRM DISPLAY 共同玄関
電 気 錠
室 内 呼
EMERG.
管理人呼
Expansion
Speaker
Or Extension
VG-R397N
非常押ボタン
強く
押す
Door Intercom
(with alarm display and
remote test terminal)
or Color Camera Foyer Unit
Notice
If the Expansion Emergency or Extension Emergency Button was pressed, the alarm will not stop even if the
Stop Alarm Button on the Indoor Master is pressed.
38
Stopping the Alarm
If the Emerg. Button was
pressed...
The alarm will stop and the
display will disappear when the
Stop Alarm Button is pressed.
If the Expansion Emergency
Button or the Extension Emergency
Button is Pressed...
The alarm will stop and the
display will disappear when the
button is pressed again.
Byuu, byuu.
Warning! Emergency situation.
Byuu, byuu.
Warning! Emergency situation.
Alarm indicator flashes.
Byuu, byuu.
Warning! Emergency situation.
Security Sensor Operation
● This display appears only if a window or foyer security sensor is installed.
Security Alarms
If a door or window with a security sensor is opened while in
alert mode, an alarm will sound and an indicator will light.
Enabling/Disabling the Alert Mode*
Touch the Window Button or Foyer Button. When set, the
security indicator will light and the Window Button or Foyer
Button will show the alarm and the set sound will be heard.
To clear the alert status, press the Window Button or Foyer
Button again. The security indicator will go out and the
suspended sound will be heard.
* Security sensors for windows or the foyer can individually
be set to alert mode from the Central Controller. Messages
can be set instead of the set and suspended sounds.
■If the alert mode is enabled
while a window or door is open,
security status will be suspended.
Monitor: Security indicator flashes and
security alarm appears.
Indoor Master
Hardware: Window or foyer security alert
indicator flashes and stop
alarm indicator flashes.
VG-M186D
火災 窓 電源
FIRE WINDOW POWER
押す 玄関 外出
PUSH DOOR ABSENT
警報音停止 画面表示
A door is open.
非 常
STOPALRM DISPLAY
EMERG.
Please check.
ハンズフリー
HANDS FREE
Extension
VG-R397N
非常押ボタン
強く
押す
A door is open.
Please check.
電 気 錠 共同玄関
室 内 呼
管理人呼
Expansion Speaker
A door is open.
Please check.
No alarm sound
Door Intercom
(with alarm display and
remote test terminal)
or Color Camera Foyer Unit
(Security Alarm)
■Using Away Settings
...
Security settings for both the window and foyer will be enabled
at the same time. (Refer to When You Are Away on page 65.)
* If only windows or the foyer is set, only the corresponding
button will be displayed.
■Setting a Delay on the
Foyer Door
Hardware: Foyer security alert
indicator flashes and
stop alarm indicator
flashes.
VG-M186D
火災 窓 電源
FIRE WINDOW POWER
押す 玄関 外出
PUSH DOOR ABSENT
警報音停止 画面表示
非 常
STOPALRM DISPLAY
EMERG.
Puu, puu, puu
ハンズフリー
HANDS FREE
After delay time elapses...
Hardware: Foyer security alert
indicator lights and
stop alarm indicator
VG-M186D
火災 窓 電源
FIRE WINDOW POWER
turns OFF.
押す 玄関 外出
PUSH DOOR ABSENT
警報音停止 画面表示
非 常
STOPALRM DISPLAY
EMERG.
ハンズフリー
HANDS FREE
■Delay Time
...Alarm will sound (puu, puu, puu) and the foyer
security function (security sensor 2) will be disabled.
If the foyer door is left open longer than the delay
time, the alarm status will be suspended until it is
closed. Press the Stop Alarm Button to turn OFF
the alarm.
39