Table of Contents
Advertisement
Safety Precautions
IMPORTANT
It is important that the following precautions are obeyed in order to prevent harm to people and damage to property.
■Precautionary information is classified and described according to the level of hazard
and physical damage that may occur as the result of incorrect operation.
DANGER
Risk of serious injury or death.
WARNING
Precautions which may cause death or serious injury.
CAUTION
Precautions which may cause accidents or damage to property.
■The following symbols indicate the type of precautions that must be obeyed.
(The following are examples of symbols.)
These items are prohibited.
Do not touch any switches on electrical devices, such as ventilation
fans, electric fans, and lighting equipment, if there is a gas leak alarm.
Sparks may cause an explosion.
Do Not Touch
Do not under any circumstance disassemble, repair, or modify the product.
Electric shock may occur.
Do Not Disassemble
Do not put your ear close to the speaker. It may suddenly produce
a loud sound.
Deafness may occur.
Prohibited
Do not drop the product or place excessive weight on the touch panel.
If the touch panel is broken, it can cause injury.
8
DANGER
WARNING
CAUTION
Application Precautions
Equipment
●Do not place objects within 20 cm of the microphone.
* The telephone may cut off or a malfunction may occur.
●Remove the protective sheet from the monitor screen.
* A protective sheet is placed on the monitor during shipment.
Adjust the touch positions before using the touch panel for the
first time. (Refer to page 93.)
Power Interruptions
●The Indoor Master cannot be used during a power interruption.
* If the Indoor Master is part of a fire alarm for an apartment building,
this function will continue to operate during a power interruption.
●Recorded video images will not be deleted during power interruptions.
●Parameters set in the settings menu will not be deleted during power interruptions.
* If there is a power interruption while parameters are being set, you will have to reset them once the power is back ON.
Message to the Customers
Automatic fire detectors may be installed as part of this system.
Automatic fire alarm systems automatically detect fires and aid in swift evacuation.
Regular and periodic inspections are required to ensure correct operation in case of a fire.
The following points must be
Regular
checked on a regular basis by the
Inspections
tenant.
Inspect the appearance of the system in your
residence. Check the following points. Make sure that
inspections are performed on a regular basis.
●Has power to the Security Intercom been interrupted?
(Check the power indicator, which is shown on page 11.)
●Is the Security Intercom or detector deformed,
damaged, or falling off?
If any of the above problems occurs or an alarm
sounds for no apparent reason, immediately contact
the manager's room.
Maintenance
Change the monitor screen (touch panel) to Clean the Display Mode (refer to page 97) and then gently wipe it with a dry cloth.
Refer to page 94 for the procedure to enter the Clean the Display Mode from the Settings Display.
●If the screen is very dirty, soak some ethanol into the cloth before wiping the screen.
(Do not use anything other than ethanol (such as alkaline based cleaners like glass cleaners, or benzine.))
Use a soft dry cloth the wipe the surface of the Indoor Master.
●If the Indoor Master is very dirty, soak a soft cloth with a solution of neutral kitchen detergent and water, ring the cloth dry,
and gently wipe the surface. Then use a dry cloth to wipe away any residue of the detergent.
●Do not use benzine or thinners. They may deteriorate the surface or cause the paint to come off.
●If using a chemically treated cloth, follow the precautions provided with the cloth.
Monitor
screen
電源
窓
W
POWER
火災
WINDO
外出
T
FIRE
玄関
ABSEN
DOOR
示
PUSH
押す
画面表
警報音
停止
DISPL
AY
非 常
ALRM
STOP
G.
EMER
Microphone
20 cm
Periodic inspections are performed twice
Periodic
a year by the company that installed the
Inspections
system or an inspection company.
●Periodic inspections are mandated by Japanese
Law if the Security Intercom is used as an
automatic fire alarm notification system.
●The Indoor Master will not sound an alarm or flash the indicator
if periodic inspection is carried out with an external tester. An
alarm will sound from the Door Intercom with an Alarm Display
or a Color Camera Foyer Unit and its alarm indicator will flash.
The confirmation indicator of the detector will momentarily flash.
Inspection methods may differ between districts or fire stations. Contact
the company that installed the system or our nearest sales office.
●Periodic inspection is required for the function that is
linked to the earthquake alarm system and outputs notifications.
Perform earthquake evacuation training with all the tenants at
the same time when perform a periodic inspection.
9
Advertisement
Table of Contents
