Ringtone Settings; Main Monitor/Extension Monitor - Function Settings List - Panasonic VL-MWD275 Operating Instructions Manual

8. Additional functions

8.3 Ringtone settings

Main monitor/extension monitor:
You can change the ringtone type and volume that is heard during an incoming call.
R For information about how to configure settings, see page 25.
Sub monitor:
See page 28 for information about changing the ringtone type. Perform the following procedure to adjust the ringtone
volume.
1. When the information screen is displayed, press
2. Press to adjust the volume.
R To mute the volume, press and hold
– To activate the sound again, press

8.4 Main monitor/extension monitor - function settings list

You can change the settings to match how the main monitor or extension monitor is used.
1
Press M N.
2
Select the desired item ®
R Repeat this step as necessary to navigate to the desired setting.
3
Select the desired setting ®
4
Press M N.
Note:
R If you do not perform any operations for 90 seconds while changing these settings, or if an incoming call is received,
the setting is cancelled and the screen turns off.
R In the following table, default settings are indicated by < >.
R While changing settings, "U" is displayed to the left of the currently selected item.
Item name: "Information display"
Sub-menu
1
Status of connected devices
*1 This item is not displayed for the extension monitor; only its contents are displayed.
Item name: "Initial settings"
1
Time and date
*2
settings
Zoom position
*1 , *3
settings
Wide/Zoom
*1 , *3
settings
24
until
.
.
.
*1
Sub-menu
2
–
Doorphone 1
- 2
Doorphone 1 When
- 2 visitors
come/When
monitoring
® select the item to change the volume for ®
is displayed. (The paging volume cannot be turned off.)
Settings
3
– 2020-1-1 0:00
– –
Zoom, <Wide>
–
Settings
For details see
page 23.
.