Telephone Settings - Panasonic VG-M186D Operation Manual

Settings
■Setting Telephone Volume (3 Levels)
This procedure can be used to set the volume of
calls transferred from a Door Intercom (with alarm
display and remote test terminal), Color Camera
Foyer Slave Unit, or Lobby Intercom to the
transfer destination telephone.
* If the transfer destination volume is extremely
low, then touch the Button. If the transfer
High
destination volume is extremely high, then touch
the Button.
Low
■Setting Answering Machine and Facsimile
To use automatic response devices such as
answering machines or fax machines with a telephone
connected to an Expansion Adapter, touch the
Button. To not use such devices, touch the
No
Button.
■Setting Electric Lock Controls from Telecon (By calling from an outside telephone).
● When using an Expansion Adapter, this display
can be used to set the controls for electric locks
connected to the Expansion Adapter.
* Only : Only lock control from Telecon
lock
: Unlock control is possible only
Unlock
for transferred visitor calls (only
lock control is performed for
incoming Telecon calls).
Lock/ : Unlock control is possible from
Unlock
Telecon.
■Set the line type.
Set the type of analog circuit for connecting the
Apartment Building Telephone Line Transfer
Adapter.
100
Touch the Button, Button,
Low Medium
or Button to change the volume
High
of calls with the transfer destination.
Yes
Touch the Button or Button to
Yes No
change the setting.
Touch the Only Button, Button,
Unlock
lock
Lock/
or Button to make the setting.
Unlock
Touch the Button or Button to
T one Pulse
make the setting.

Telephone Settings

Telephone Display
■Setting Extension Bells
This display can be used to set whether a
telephone connected to an Expansion Adapter will
ring when a call comes from the Door Intercom
(with alarm display and remote test terminal),
Color Camera Foyer Slave Unit, or manager's
office.
* Touch the Button when a telephone with an
No
answering function or a fax machine with a
telephone function is connected, and when
recordings or faxes are to be received from the
Door Intercom (with alarm display and remote test terminal), Color Camera Foyer Slave Unit, or manager's
office. There will be no away response. In this case, however, a ring will not be audible from the telephone
with the answering function or the fax machine with the telephone function even when an extension call
comes in.
(With extension calls, if you hear the incoming call sound from the Indoor Master or an Expansion Speaker,
you can pick up the handset on the telephone to talk to the other party.)
■Setting Security Sounds
This display can be used to set whether a
telephone connected to an Expansion Adapter will
ring when security is activated.
* To have a connected telephone ring when a
security alarm occurs, touch the Button. To
Yes
not have it ring, touch the Button.
No
■Setting a Distinction between Ringing for Extension and Outside Lines
This display can be used to set whether a
distinction is to be made between the ring patterns
for incoming calls from outside lines and calls from
the Door Intercom (with alarm display and remote
test terminal), the Color Camera Foyer Slave Unit,
or the manager's room.
* To not hear any sound for extension calls on the
telephone (including calls from the Door Intercom
(with alarm display and remote test terminal), the
Color Camera Foyer Slave Unit, or the manager's
office), touch the Button. Call sounds will
No
then be inaudible. In this case, however, no
distinction will be made between call intervals
from outside lines and from extension calls.
Settings
This setting is displayed only if an Expansion Adapter
and Telephone are connected.
1
Touch the Telephone Button (see
page 94) on the User Settings Display
(2/2).
● The Telephone Display will appear.
Touch the Button or Button to
Yes No
change the setting.
Touch the Button or Button to
Yes No
change the setting.
Touch the Button or Button to
Yes No
change the setting.
101