Lobby Intercom; Part Names And Functions; Calling Function - Panasonic VG-M186D Operation Manual

Part Names and Functions

●Product numbers are displayed on the bottom of the product.
Lobby Intercom with Camera
XVG-K521CDN-S, XVG-K521CDN-Y, or XVG-K522CDN-S

Lobby Intercom

XVG-K521ADN-S, XVG-K521ADN-Y, or XVG-K522ADN-S
●
1
Parcel Indicator
5
Message indicator
宅 配 メッセージ
警戒中 施 錠
使用中 解 錠 電源
4 Power
Indicator
3
Unlock Indicator
2
Busy Indicator
To Customers Using a Lobby
Intercom with a Camera
The Lobby Intercom is used for calls
between the lobby and a housing unit with
the audio and video function.
To Customers Using a Lobby Intercom
The Lobby Intercom is used for calls
between the lobby and each unit with the
audio function.
1
Parcel Indicator (Red) This indicator lights when a parcel arrives after ID verification.
●
2 Busy Indicator (Red) This indicator lights when the tenant of the unit is in a call with another connected device.
●
3
Unlock Indicator (Red) ● This indicator lights when the lobby electric lock is unlocked.
4 Power Indicator (Green) This indicator lights while power is supplied.
●
5
Message indicator (Red) This indicator lights when a message is recorded after ID verification.
●
6 Monitor camera Visitor images are recorded and shown, for example, on the housing information board. (Lobby Intercom with camera only)
●
7
Speaker Call sounds, the conversation and notification sounds can be heard.
●
8 Unit Number Display Area
● The unit number of the other party or the unit that sent an alarm is displayed here.
9 Keypad Buttons These buttons are used when calling another unit or unlocking the lobby electric lock with the security number.
●
10 Microphone
● Microphone for talking.
11 Reverse Master Key Switch Used to release the lock with the reverse master key.
●
A Non-contact Key Reader (ID Verification Unit)(sold separately) can be installed.
(Optional)
24
This section describes the Lobby Intercom with a Camera.
6
Monitor camera
Lobby Intercom with
Camera only
7
Speaker
異 常 次表示
宅 配 メッセージ
警戒中 施 錠
使用中 解 錠 電源
8 Unit Number
1 2 3
Display Area
4 5 6
7 8 9 9
Keypad Buttons
0 消
呼出
10
Microphone
11
Reverse Master Key Switch
(Optional)

Calling Function

Calling Units
Lobby Intercom with Camera
異 常 次表示
宅 配 メッセージ
警戒中 施 錠
使用中 解 錠 電源
1 2 3 1
Keypad Buttons
4 5 6
7 8 9
Del
0 消
呼出
2 Call
Indoor Maser
Receiver Volume
Lobby
REC Full Low High Unl o ck
試験
VG-M186D
火災 窓 電源
FIRE WINDOW POWER
押す 玄関 外出
PUSH DOOR ABSENT
警報音停止 画面表示
非 常
STOPALRM DISPLAY
EMERG.
ハンズフリー
HANDS FREE
1
Calling from the Lobby Intercom
1
Input the unit number using the
Keypad buttons.
* If you enter the wrong unit number, press
the Button and repeat the procedure
Del
from the beginning.
2 Press the Call Button.
You will hear the call sound (poro poro).
●
● If there is no response on the Indoor
Master, the call will be canceled after about
30 seconds.
Refer to Talking to the Lobby Intercom
on pages 16 to 18 for the procedures
for the Indoor Master.
You can talk for up to 3 minutes (default
●
setting).
The talk time can be set to 1 to 10
minutes from the Central Controller.
Consult with the company that
installed the system.
2 Responding to the Call and Unlocking
the Lobby Door (Electric Lock)
● Refer to Unlocking the Lobby's Electric Lock
on page 18 for the procedures for the Indoor
Master.
25