Panasonic VG-M186D Operation Manual page 30

Color monitor indoor master for digital pair wiring system
Table of Contents

Advertisement

Summary of Alarms
Priority of Alarms
If several problems occur simultaneously, the alarm sound with the highest priority will be heard.
Priority
1.
Fire or fire confirmation
High
2.
Gas leak
3.
Fire in adjacent unit
4.
Fire detector disconnection
5.
Gas leak detector error
6.
Incomplete combustion
7.
Emergency, expansion emergency,
or extension emergency
8.
Earthquake of Shindo 5 weak or higher
9.
Emergency
10.
Security suspended, security
11.
Bathroom call
12.
Toilet call
13.
Pendant call
14.
Dead Pendant battery
15.
Water leak
16.
Equipment error
17.
Contact/call
18.
Earthquake between Shindo 3 and 5 weak
19.
Earthquake false alarm
20.
Earthquake test
Low
21.
Security alarm
58
If several problems occur simultaneously, or if a
problem with a higher priority occurs afterward, the
alarm sound and the alarm display will switch to the
alarm with the higher priority.
Both items will appear on the display.
Press the Stop Alarm Button to stop the first alarm.
The next alarm will be sounded.
If gas leak and incomplete combustion alarms
occur at the same time, the incomplete
combustion alarm will not be sounded even
when the Stop Alarm Button is pressed.
Display Example
Operation When Detectors and Sensors Are Reset
The operation will be as described below when the cause of the problem is removed.
The following table shows the operations when the cause of the sensor alarm is removed and
the sensor returns to standby status.
Normal Sensor Operation
Apartment Building Indoor
Alarm
Master
Alarm output turns ON and OFF
Alarm sound stops.
as the sensor turns ON and OFF
Alarm display disappears.
The alarm will sound until
the Stop Alarm Button is
Sensor ON status is held at the
pressed, and then the
Indoor Master and an alarm is
alarm indicator will flash
output.
until the sensor is reset.
Sensors for Which the Operation Is Determined in Advance
Apartment Building Indoor
Alarm
Master
Fire confirmed.
The alarm will sound and
the alarm indicator will
flash until the Stop Alarm
Button is pressed.
Fire (local fire alarm
(See note 1.)
for apartment building)
Fire (local fire alarm in dwelling
unit), fire in adjacent unit, fire
detector disconnection, gas leak,
incomplete combustion, Gas
Alarm sound stops.
Alarm display disappears.
Contact call or water leak
The alarm will sound and
the alarm indicator will
Indoor Master emergency
flash until the Stop Alarm
Button is pressed.
The alarm will continue to
sound and the alarm
indicator will flash until the
Stop Alarm Button is
Security
pressed or the Away
Button is touched to
disarm the security.
(See note 2.)
note 1
With automatic fire alarm systems for apartment building, the fire is confirmed after the detector operates by one of the
following methods: (1) after a fixed time (2 to 5 min) has elapsed or (2) by pressing the Fire Confirmation Button.
To return to normal status, it is necessary to reset at the housing block receiver.
note 2
When the alarm stops and the security sensor is reset, the security indicator lights and the security alarm will go into
Alert Mode.
Summary of Alarms
Expansion Speaker for
Door Intercom (with alarm display and remote test
Extension
terminal) or Color Camera Foyer Unit
Alarm sound stops.
Alarm sound stops.
Alarm indicator turns OFF.
The alarm will sound until
The alarm will sound until
the Stop Alarm Button is
the Stop Alarm Button is
pressed, and then the alarm
pressed.
indicator will flash until the
sensor is reset.
Expansion Speaker for
Door Intercom (with alarm display and remote test
terminal) or Color Camera Foyer Unit
Extension
The alarm will continue to
sound at the Indoor
The alarm will continue to
Master unit it is stopped
sound and the alarm
by the procedure given on
indicator will flash at the
the left.
Indoor Master unit it is
stopped by the procedure
given on the left.
Alarm sound stopps.
Alarm indicator turns
OFF.
Alarm sound stops.
The alarm will continue to
sound and the alarm
indicator will flash at the
Indoor Master unit it is
stopped by the procedure
given on the left.
The alarm will continue to
sound at the Indoor
Master until it is stopped
by the procedure given on
the left.
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vg-m187d

Table of Contents