Table of Contents
Advertisement
Settings
Key Options
Key Options Display
■Setting the Language for Screen Displays and Voice Messages
The language for screen displays and voice messages can be set
to either Japanese or English.
* Select
for Japanese and
for English.
English
Japanese
* The setting will be applied when you return to the Top Menu.
■Setting Touch Sounds
This display can be used to set the touch sound for when buttons are
touched on a display.
* To set the sound for when a button is touched, touch the
Button. To set no sound, select the
No
Button.
* The touch sound for the Hands-free Button are not affected by
this setting.
* The touch sound is not enabled for network-related functions
(easy mail, information service, notices) regardless of this setting.
■Setting New Information Notifying (Displayed for Information Service)
This display can be used to set whether notification of newly
arrived information is to be displayed by the information service
(see page 75 ).
* To be notified of newly arrived information, touch the
To not be notified, touch the
Button.
No
* If the
Yes
Button is touched, a yellow ring will be displayed
around the Information Service Button and the display indicator
will flash when new information arrives.
* New information will still arrive even if the
98
1
Touch the Key options Button (see
page 94) on the User Settings Display
(1/2).
●
The Key Options Display will appear.
Touch the Button or
Japanese
Button to change the setting.
Yes
Touch the
Yes
Button or
Button to change the setting.
Button.
Ye
Yes
Touch the
Yes
Button or
Button to change the setting.
Button is touched.
No
Security Numbers
Security Number Setting Display
* If you make a mistake, touch the
* A security number is displayed only if one has been
registered.
* Touch the
Button. If you end the procedure
O K
without touching the
O K
will not be set.
* If a security number has already been registered, it
will be displayed using asterisks.
* The security number can be changed even during
Away Mode, but it cannot be changed during the
security alarm delay time or for 30 minutes after a
security alarm.
Call Transfers
English
Call Transfers Display 2/2
■Setting the Transfer Telephone Number
This procedure can be used to set a telephone
No
number to transfer visitor calls from a Door
Intercom (with alarm display and remote test
terminal), Color Camera Foyer Unit, or Lobby
Intercom.
Telephone
Number Display
* Touch the
Button to return to the Call Transfers Display (1/2).
Back
* If you make a mistake, touch the
* Set a maximum of 35 digits for the transfer telephone number.
* Touch the
Button. If the display is closed without touching anything, then no transfer telephone number
No
O K
will be set.
This display will appear only if a Apartment Building
Telephone Line Transfer Adapter is connected or
foyer security is being used.
A security number of from 2 to 6 digits is set.
The security number is used to disarm security or to
start Telecon operations.
1
Touch the Security Number Button
(see page 94) on the User Settings
Display (1/2).
The Security Number Setting Display will
●
appear.
Clear
2
Touch the
security number from 2 to 6 digits.
Button, the security number
3
Touch the OK Button.
1
Touch the Call Transfers Button (see
page 94) on the User Settings Display (1/2).
●
This display will appear only if a Apartment Building
Telephone Line Transfer Adapter is connected.
Call Transfers Display 1/2
2
Touch the Telephone Number Buttons on
the Call Transfers Display (1/2).
●
The Telephone Number Display will appear.
3
Touch the
transfer telephone number.
4
Touch the OK Button.
Button.
Clear
Continued on the next page
Settings
1
to
0
Button to set a
to
Buttons to enter the
1
＃
99
Advertisement
Table of Contents
