Talking To The Manager's Room - Panasonic VG-M186D Operation Manual

Color monitor indoor master for digital pair wiring system
Table of Contents

Advertisement

Talking to the Lobby Intercom
Releasing the Electric Lock at the Lobby
Display 1
Displayed when volume is adjusted.
Displayed when volume is adjusted.
Display 2
Displayed when volume is adjusted.
■Receiving a Call from the Door Intercom
 or Color Camera Foyer Unit
...You will hear a chime (pin-pon) from the handset and
the Indoor Master.
...If the handset on both the Indoor Master and Extension
are replaced and then the responding party picks up the
handset again, you can talk to the Door Intercom (with
alarm display) or Color Camera Foyer Unit.
Notice
●Images from the Lobby Intercom will be displayed frame by frame.
●You cannot call the Lobby Intercom.
●When using a Lobby Intercom with a camera, the image will be automatically recorded when someone calls.
(Refer to page 61 for information on playing back images.)
●When using a Lobby Intercom with a camera, it may take a few seconds for the Incoming Call Display to appear after a call is made.
●The lobby electric lock can be unlocked by pressing the Display Button for more than 3 seconds while talking to the Lobby Intercom.
18
1
Touch the
Button while talking
Unlock
with the Lobby Intercom.
If the Lobby Intercom does not have a
camera, Display 2 will appear.
When using a Lobby Intercom with a camera,
*
the electric lock will be unlocked even if the
Unlock
Button is touched while the Incoming
Call Display is being displayed.
2
Opens the lock.
■Example Telephone Procedure:
 Receiving a Call from the Lobby Intercom
1.
You will hear the call sound (lu lu lu).
2.
Pick up the handset within about 30 seconds.
■Unlocking the Lobby Electric Lock with the Telephone
1.
2
Touch the
Button on the telephone while talking to the Lobby Intercom.
2
* Touch the
Button after the
Button if the
telephone has a push dial.
2.
You will hear a Pi-pi-pi-pi-pi-pi sound, and the lock will be released.

Talking to the Manager's Room

Receiving a Call from the Manager's Room
Incoming Call Display
Displayed when volume is adjusted.
2
Responding from the Handset
Pick up the handset.
The Talk Display will appear
and you can then talk to the
calling party.
Displayed when volume is adjusted.
Talk Display
4
Replace the handset when
you are finished.
The display will disappear and
 the call will be ended.
Notes and notices on hands-free talking
1
A call sound will be heard when you
receive a call from the manager's room
and the Incoming Call Display will appear.
The chime can also be heard from Expansion
Speakers.
Touch the
or
Button to adjust the
High
Low
ringer volume.
The call sound is the same from the Lobby
Intercom and the manager's room, but the
ringing interval is different.
Responding Hands Free
Press the Hands-free Button.
You will hear a "Pi" sound, the Talk
Display will appear, and you can
ハンズフリー
HANDS FREE
then talk to the calling party.
3
Talk.
Using the Handset
About 3 minutes* after you pick up the handset,
the display and call will be automatically cut off.
If the talk time is set to longer than 3 minutes
*
from the Central Controller, the display will
automatically disappear after about 3
minutes, but the call can be continued.
You will hear a "Tsu-tsu" sound from the
handset 10 seconds before the call is cut off.
Hands Free
About 1 minute after you press the Hands-free Button,
the display and call will be automatically cut off.
Touch the
or
Button to adjust the receiver volume.
Low
High
(The volume cannot be adjusted for hands-free calling.)
Press the Hands-free Button
when you are finished.
ハンズフリー
HANDS FREE
You will hear a "Pi" sound, the
 display will disappear, and the
 call will be ended.
Refer to page 11
Pi
Pi
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vg-m187d

Table of Contents