Configuring And Confirming Settings At Installation - Panasonic WX-CC411BP Operating Instructions Manual

Browser Operation
7 [SD memory card] button
This button is used to confirm the total storage capacity
and remaining storage capacity on the SD card inserted
into the Center Module. (p. 28)
8 [Quick] button
This button is used to configure the operation settings
that can also be set by touching the
Operation button) on the Center Module. (p. 29)
9 [Backup] button
This button is used to back up Center Module settings
and the message voice source file. (p. 29)
Maintenance
: [Maintenance] button
This button is used to perform various maintenance tasks.
Important
w p The maintenance menu is for maintenance staff.
Altering settings and performing operations using the
maintenance menu may affect store operation.
w Configuring and Confirming
w
Settings at Installation
This section describes how to configure and confirm settings
related to installation, such as; date and time settings;
network settings; each server settings; Network Camera
settings; help contacts; screen settings; site information;
(Quick
audio quality settings; order post microphone settings; and
terminal settings.
To display this screen, click the [Installation] button in the
Setup menu panel.
q Configuring and confirming the date and
w
time setting [Date & time]
This function is used to configure and confirm the date, time
and daylight saving time settings for the Center Module.
To display this screen, click the [Installation] button, then the
[Date & time] tab.
After authentication, the following screen will be displayed.
[Center module time]
Displays the current date and time of the Center Module.
The date is displayed in the format of MONTH / DAY / YEAR.
The time is displayed as a 24-hour clock.
[NTP/ Time zone]
Clicking on [NTP>>] displays the [Server] tab.
The NTP server settings can be configured in the [Server]
tab.
[Date & Time Settings]
Configure the current date and time of the Center Module.
The date is displayed in the format of MONTH / DAY / YEAR.
The time is displayed as a 24-hour clock.
Setting range:
Default setting:
[Daylight saving time ON/OFF/AUTO]
Configure the setting for daylight saving time.
ON:
OFF:
AUTO: Daylight saving time is set based on the set date
[Daylight saving time Start date & time], [Daylight saving
time End date & time]
Set the start date and time and end date and time when
Daylight Saving time is set to AUTO.
11
2020/01/01 00:00 to 2035/12/31 23:59
Date and time displayed on the Center
Module
Set the time to daylight saving time. (Advance the
current time by 1 hour)
Cancel daylight saving time.
and time to start and end (Month, week, day of the
week, time).