Remove the ADF pressure plate cover. See
4.
5.
Use a flat-blade screwdriver to open the latch (C) the output sensor card.
Remove the ADF exit sensor and cable.
6.
ADF hinge (left and right) removal
The hinges are removed in a similar manner. Only one hinge is shown in this removal.
1.
Remove the ADF. See
Turn the ADF over.
2.
Remove the four screws (A) of the hinge you want to remove.
3.
Remove the hinge.
4.
"ADF pressure plate cover removal" on page 4-244
"ADF removal (entire)" on page
4-228.
Repair information
7526
Previous
Next
Go Back
4-235