Check Fuel Level Sensor; Ignition; Ht Coil; Spark Plug Cap - Malaguti MALBO Line Service Manual

CHECK FUEL LEVEL SENSOR

- Remove the helmet case.
- Disconnect the fuel level sensor connector.
- Remove the sensor (1) from the tank.
- Measure sensor resistance as per the table.
Float position
"F" position
"E" position
If the measured values are different, replace the
sensor.

IGNITION

Ignition type: Advance variable

HT COIL

Winding
Primary
Resistance
Winding
Secondary

SPARK PLUG CAP

Resistance
Resistance
6-10 Ω
90-100 Ω

STATOR (POWER 70W)

Component
0,45Ω ± 10%
at 25°C
Pick-up (Blue/yellow wire)
3KΩ ± 20%
Coil (Red/Black wire)
at 25°C
Light supply
(Yellow wire)
Battery charge
(White wire)
5KΩ ± 20%
Battery charge voltage
72 03/10
1
F
E
Resistance
153Ω ± 10%
420Ω ± 10%
0,9 Ω
1 Ω
14 ± 0,5V
Fig. 99
Fig. 100