Install the following new parts:
- Fork cone (7).
- Steering caps (8).
DISMANTLING THE FORK
- Lubricate the caps
- Install 26 ball cages (9) for the upper cap and 29 ball
cages (10) for the lower cap (ø 5/32).
- Insert the fork in the steering shaft.
- Install and tighten the adjustable cone (11).
- Loosen and re-tighten the adjustable cone.
- Position the lock washer (12).
- Install and tighten the steering lock nut (13).
Cs - N * m
13
30
OIL LEVEL CHECK
- Insert a stick or gauge and check that oil is 110 ±5 mm
from the upper edge of the rod (move the rod to end
stop).
If necessary, top up with oil: Q8 FORK OIL
Quantity per tube ~ 40 cc
7
12
10
30
03/10
8
13
11
9
Fig. 41
Fig. 42
Fig. 43