Frame Dimension Check - Malaguti f10 Service Manual

Before removing the engine shaft, you must lift the scooter from its rear
part. For this operation it is advisable to have another operator help you.
Removing the engine from the frame is a dangerous operation, and should
be carried out with maximum care and attention in order to avoid crushing
arms and legs and to protect the engine itself.
Removing the pieces and parts which allow the engine to be separated
from the frame means that a certain number of straps must be cut. These
must be replaced and positioned as in the original configuration. Check the
illustrations on the upcoming pages.

FRAME DIMENSION CHECK

• In case of presumed deformation, however slight, of the frame after an accident,
check the dimensions of the frame.
Check value A = 819 mm (tolerance ± 2 mm)
• In case the values found are out of the tolerance range, replace the frame.
It is absolutely forbidden to deform the frame in order to reset value
(A) as in its original configuration.
F.78
36 03/08