Specifications - Malaguti MALBO Line Service Manual

SPECIFICATIONS

MALBO Line reserves the right to modify the specifica-
tions at any time without prior notice.
Dimensions
Wheel base (A-Fig. 01) m .....................................1,200
Max. length (B-Fig. 01) m ......................................1,640
Max. width (C-Fig. 01) m ......................................0,685
Max. height (D-Fig. 01) m ......................................1,075
Kerb weight kg ...........................................................85
Max. load with rider, passenger and luggage Kg .....160
Capacity
3
Engine oil cm ........................................................ 800*
3
Transmission oil cm .............................................. 120*
Fuel tank capacity (reserve) l .......................... 6,0 (1,5)*
Engine: single-cylinder - 4-stroke
Type ................................................................ 139QMB
Cylinders ......................................................................1
Bore x stroke mm ........................................ Ø 39 x 41,4
3
Capacity cm ..............................................................49
Compression ratio ..............................................10,5 : 1
Cooling ............................................................forced air
Starting system ...................electrical and/or kickstarter
Lubrication system ........................... by wet crank case
Spark plug
Type ....................... NGK CR7HSA - A7RTC - LDA7TC
Transmission
Primary: automatic speed variator by V-belt.
Final: by gears.
Automatic centrifugal dry clutch.
Fuel system
Automatic starter
Fuel: unleaded petrol.
*Indicative Value
Ignition
Electronic.
Brakes
Front brake:
disk type, Ø 155 mm
transmission and hydraulic calipers.
Rear brake:
drum Ø 110 mm
mechanical transmission.
Chassis
High resistance tubular steel frame.
Suspensions
Front: hydraulicall fork Ø 26 mm.
Rear: Swinging engine with hydraulic shock absorber
featuring helical spring.
Battery
Fig. 01
12V, 5Ah, maintenance-free.
Tires
Front: .........3.50 - 10 42J (tubeless)
Rear: .........3.50 - 10 42J (tubeless)
It is possible to use tires with load-capacity and
speed indexes that are higher than or identical
to those indicated.
It is however necessary for the speed indexes
to be identical for both tires.
2 03/10