Assembling The Stator And Pick-Up - Malaguti MALBO Line Service Manual

- Assemble the right crankcase (2).
- Tighten the 4 screws (3) (85 mm).
- Tighten the 4 screws (4) (100mm).
- Make sure the crank shaft freely rotates in the crank-
case.
Cs - N * m
3-4
10

ASSEMBLING THE STATOR AND PICK-UP

- Position the stator as indicated.
- Tighten the 2 screws (1).
- Tighten the 2 screws (2).
Cs - N * m
1
6
Cs - N * m
2
8
Check correct woodruff key (3) position as indi-
cated in the figure, before mounting.
- Position the rotor on the crank shaft.
- Lock the rotor with the specific tool.
- Position and tighten the rotor nut to the indicated tight-
ening torque (Page 44 - Fig. 14).
55 03/10
Fig. 50
Fig. 51
Fig. 52