Dismantling The Starter Motor; Dismantling The Etc Intake Manifold; Dismantling The Air Conveyors - Malaguti MALBO Line Service Manual

DISMANTLING THE STARTER MOTOR

- Remove the 2 fixing screws (1).
- Remove the starter motor (2) after disconnecting the
positive wire.
Cs - N * m
1
10
Check starter motor O-Ring conditions.

DISMANTLING THE ETC INTAKE MANIFOLD

- Unscrew the 2 intake manifold fixing nuts.
- Remove the intake manifold.
- Remove the two O-Rings.
Cs - N * m
1
10
If necessary, replace the O-Rings.

DISMANTLING THE AIR CONVEYORS

- Remove the 4 fixing screws (1).
- Remove the conveyor (2).
- Unscrew the fixing screw (3).
42 03/10
Fig. 07
Fig. 08
Fig. 09