Dismantling The Valve - Malaguti MALBO Line Service Manual

- Remove the 2 starter mounting screws (5).
- Remove the starter mounting and relevant gasket.

DISMANTLING THE VALVE

- Remove the 2 valve cover screws (1).
- Remove the valve cover (2).
- Remove the spring.
- Remove the needle, valve and diaphragm.
- Remove the needle lock (1) and relevant spring (2) ro-
tating it ¼ a turn.
- Remove the needle and relevant washer (3).
The needle position is adjusted by the manufac-
turer and cannot be modified.
63 03/10
Fig. 75
Fig. 76
Fig. 77