- Remove the clutch assy (2), the spring holder cup (3),
spring (4) and pulley side cup.
- Slide out the guide pins (6).
- Separate the secondary fixed pulley (7) and secondary
mobile pulley (8).
ASSEMBLING THE CLUTCH ASSY
- After ensuring that the 2 oils seals (1-Fig. 73) and mo-
bile pulley O-Rings (2) are in good conditions, grease
the 3 guide pins (6) and install parts in reverse disman-
tling order.
- Tighten the nut (1-Fig. 72).
Cs - N * m
1
50
DISMANTLING THE CARBURETTOR
DISMANTLING THE STARTER
- Remove the starter cover (1).
- Remove the screw (2) and starter plate (3).
- Remove the starter (4) marking its direction.
62
03/10
Fig. 72
Fig. 73
Fig. 74