Front Rim Check (Wheel Removed); Checking The Front Wheel Spindle; Dismantling The Brake Pad Set - Malaguti MALBO Line Service Manual

FRONT RIM CHECK (WHEEL REMOVED)

Check front rim oscillation (Radial and Axial) and make
sure it does not exceed the service limit. If oscillation was
caused by the bearing, the rim may be reused after replac-
ing the bearing. Otherwise, replace with a new rim.
Oscillation limit = 2.0 mm

CHECKING THE FRONT WHEEL SPINDLE

Check front shaft oscillation with a centesimal gauge and
replace it if it exceeds the service limit.
Measurement instrument: Micrometer
Linearity limit: 0,25 mm

DISMANTLING THE BRAKE PAD SET

Do not pull the brake lever before installing the pad
set.
- Remove the screw (4).
- Rotate the calliper away from the cover.
- Remove the calliper cover.
Cs - N * m
4
26
26 03/10
Fig. 33
Fig. 34
4
Fig. 35