3-3 Connections
3-3 Connections
You can attach either a Betacam SP VTR or a camera
adaptor to the video camera. Attaching a camera
adaptor allows you to connect other equipment such as
a VTR, a camera control unit, and an AC adaptor.
3-3-1 Attaching a Betacam SP
VTR
Attaching a BVV-5/5PS Betacam SP VTR to the video
camera requires the use of the CA-553 Betacam 50-pin
interface (not supplied).
Attaching a Betacam SP VTR
1
Remove the grip of the video camera.
Loosen the screws with screwdriver.
2
Attach the grip supplied with the CA-553 to the
video camera.
Tighten the screws.
3-4
Chapter 3 Setting Up the Video Camera
3
Attach the CA-553 to the video camera.
CA-553
4
Remove the VTR grip.
5
Connect the VTR to the video camera.
CA-553
Letter Ver.3.0
Tighten the screws.
Loosen the
screws.
BVV-5/5PS
3-810-005-11(1)