3-7-3 Detaching the Viewfinder
1
3
1
Loosen the left-right positioning ring on the
viewfinder.
2
Holding the viewfinder stopper up, slide the
viewfinder in the direction of the arrow, then
detach the viewfinder.
3
Remove the viewfinder cable from the clamps,
then disconnect the connector.
2
Viewfinder stopper
3-7-4 Detaching the Eyepiece
While shooting with your eye away from the
viewfinder, you can detach the eyepiece to get a
clearer view of the entire screen. The CRT screen and
mirror can also be cleaned more easily when the
eyepiece is detached.
To detach the eyepiece, proceed as follows:
1
Turn the eyepiece locking ring fully
counterclockwise until the red match marks on the
locking ring and the viewfinder barrel are aligned.
Match mark
Match mark
2
Detach the eyepiece.
Match mark on the end of the eyepiece
Chapter 3 Setting Up the Video Camera
Letter Ver.3.0
Locking ring
3-13
3-810-005-11(1)