Connections And Settings - Sony DCR-TRV8 Operating Instructions Manual

Hint
If a message box appears indicaHng a commutrications problem, refer to steps 6 and 7 ot
Connections and Settings, and perform the following steps:
• Decrease the baud rate.
• Confirm that the port settings are correct.
Note
If an image has been read and any of the following actions taken, repeat the procedure
from step 1.
- The digital still camera has been turned off and back on.
- The cable hcis been discoimected.
- Any new image has been taken, or an image deleted with the digital camera.
- The Memory Stick was removed from the camera (for devices that include a Memory
Stick).
Notes
• After working with an image after viewing the List View, such as Single-Image
viewing, some time will be required to re-read the images.
• As the digital still camera and PC are busy communicating until all image are read,
do not disconnect the cable during this period.
Please see page 25.