Standards - Siemens SINAMICS G110D Operating Instructions Manual

Appendix A
A.2 Standards
A.2

Standards

Standards
Certificates can be downloaded from the internet under the following link:
http://support.automation.siemens.com/WW/view/de/22339653/134200
(http://support.automation.siemens.com/WW/view/en/22339653/134200)
218
European Low Voltage Directive
The SINAMICS G110D product range complies with the requirements of the
Low Voltage Directive 2006/95/EC. The units are certified for complaince
with the following standards:
EN 61800-5-1 — Semiconductor inverters –General requirements and line
commutated inverters
EN 60204-1 — Safety of machinery –Electrical equipment of machines
European Machinery Directive
The SINAMICS G110D inverter series does not fall under the scope of the
Machinery Directive. However, the products have been fully evaluated for
compliance with the essential Health & Safety requirements of the directive
when used in a typical machine application. A Declaration of Incorporation is
available on request.
European EMC Directive
When installed according to the recommendations described in this manual,
the SINAMICS G110D fulfils all requirements of the EMC Directive as de-
fined by the EMC Product Standard for Power Drive Systems EN 61800-3
Underwriters Laboratories
UL LISTED POWER CONVERSION EQUIPMENT for use in a pollution de-
gree 2 environment.
ISO 9001
Siemens plc operates a quality management system, which complies with
the requirements of ISO 9001.
Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
SINAMICS G110D