Example: Configuring The Inverter On The As-I Network - Siemens SINAMICS G110D Operating Instructions Manual

Functions
6.11 Operation in fieldbus systems
connected to the part of the AS-i network furthest from the power unit. Only one power unit is
required to power the slaves on the segement up to 200 m (656 ft).
6.11.1.3

Example: configuring the Inverter on the AS-i network

Example: configuring the Inverter on an AS-i network
Task
To integrate the Inverter on an existing AS-i network under the control of an AS-i master.
The control signals and speed setpoints will be transferred thourgh the AS-i master to the
Inverter. In the other direction, the Inverter is to transfer its status messages and actual
speed value to the higher-level controller through the AS-i master.
What prior knowledge is required?
This section does not explain how to use the higher-level controller or the varius software
engineering tools.
Hardware components (example)
Component
AS-i devices and cables
AS-i Master
AS-i Power supply unit
AS-i Cable Trapezoidal
AS-i Cable Trapezoidal
AS-i M12 connection kit
Inverter
SINAMICS G110D
IOP
Motor
Standard motor
Notes:
1. Cable length depends on the user requirements and cannot be specified.
2. Although the SINAMICS G110D FSA Inverter is specified, all the SINAMICS G110D Inverters are configured in the
same manner
160
Type
CP343-2
-
Yellow
Black
-
Frame size A - 0.75 kW
Intelligent Operator Panel
Three-phase induction motor
Order no.
6GK7343-2AH01-0XA0
3RX9-501-0BA00
3RX9013-0AA00
3RX9023-0AA00
3RK1901-1NR21
6SL3511-0PE17-5AM0
6SL3255-0AA00-4AA0
1LA7060-4AB10
Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
Qty
1
1
See note 1
See note 1
1
See note 2
1
1
SINAMICS G110D