Siemens SINAMICS G110D Operating Instructions Manual page 166

Functions
6.11 Operation in fieldbus systems
Image 6-29
Select the AS-i slave from the drop-down list. Three basic types of AS-i slave are available:
● AS-i slave universal - AS-i slave with extended addressing mode
● AS-i standard slave universal or AS-i analog slave - AS-i slave for the standard address
area; if you use this slave type, you cannot place an AS-i A/B slave at the same address
in the B address area.
● Siemens slaves - with this option you can configure the AS-i slave by simply selecting the
relevant order number from the drop-down list.
Image 6-30
166
Properties dialog CP343-2 - slave configuration
Configuring an individual slave
Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
SINAMICS G110D