Siemens SINAMICS G110D Operating Instructions Manual page 51

NOTICE
Damage of the converter by disconnecting the motor during operation
The disconnection of the motor cable by a switch or contactor during operation may
damage the converter.
• Disconnect converter and motor during operation only if it is necessary in terms of
Table 4- 16
Table 4- 17
SINAMICS G110D
Operating Instructions, 07/2016, FW V3.63, A5E36768472B AB
personal security or machine protection.
Mains supply and motor output specifications
Mains supply
Pin Function
1 L1
2 L2
3 L3
4 -
11 -
12 -
PE Protective Earth
Type HAN Q4/2 (Male)
Spec. 3AC 380V...500V
± 10%
Digital input specifications
Digital input (2 sockets, 4 DIs)
Pin Function
1 +24 V (25mA max.)
2 DI1 or DI3
3 U0V
4 DI0 or DI2
5 Functional Earth
Shield Functional Earth
Type M12 - 5 pole (Female)
Spec PNP, SIMATIC-compatible, low < 5 V, high > 10 V, max. input voltage 30V
Connection
4.8 Cables and connections
Motor output
Pin Function
1 U
2 Not connected
3 W
4 EM Brake (-)
5 Temperature sensor (+)
6 EM Brake (+)
7 V
8 Temperature sensor (-)
PE Protective Earth
Type HAN Q8 (Female)
Spec. -
51